Yaesu Ft-80c Mods
Sekali lagi radio FT-180A diproduksi oleh Yaesu Mugen untuk kepentingan komersial. Tags: FT-474, FT-80C, FT-80C Mods, HF, Twieking FT-80C, Yaesu 216 comments.
Remove all 3 of the knobs from the front of the radio. You will need a metric allen wrench to remove the 3 front panel screws. Carefully pull the front face of the radio away from the body being careful not to disconnect the ribbon cable. Look inside of the front cover for 3 pads (see picture) Two of them are not solder jumpered and one is. De-solder the only pad that is jumped with a solder bead. Reassemble the radio. While powering up the radio press and hold the DW REV – A/N LOW – MW D/MR buttons simultaneously to perform a full reset.
Confirm the reset when prompted by pushing MW D/MR. Yaesu ft 2900r questions Hi all, I've bought this radio and am trying to learn how to use it.
I wonder whether anyone can help with any of these questions: 1) When I put the marine emergency channel frequency into memory, tune to that, and key the mic, it shows ERROR. Is that because I haven't modded it yet? 2) When I tune the radio to the frequency of a local repeater, then key the mic, the radio shuts off and re-starts. Is that telling me that my antenna is inadequate, or what does it mean? 3) Trying to put all the marine VHF channels I entered into one memory bank, I get the message 'no bank', yet I can find the bank to rename it and it shows as empty.
Must be missing something in the entry sequence, and the manual is no help. Thanks for any help with these.Tom. FT2900R Sorry to sound stupid. But I am totally new to all this radio stuff.
- There are several pages of information about the Yaesu FT 102. These will be simple and easy to do mods. By serial number 050xxx Yaesu.
- Modification / homebrew for Yaesu ft-80: Low power TX and distorted audio on RX. FT-747GX & FT-80C.
I have been playing around with a Humminbird VFH5. I recently purchased a FT2900 and a FT270. I was hoping to be able to transmit to the Humminbird but I see the frequency that I use on it most is 156.475 And I see that the FT2900 is Recieve 136-174 but the Transmit is only 144-148? This mod you are doing here does this allow me to transmit on 156.475 or what ever freq in the Marine band? Also is there away to Modify the FT270 like the Ft2900 if this does what I hope it would be great. I can't believe the amount of info on this site.
More info on Mod problems It is on our Caprock repeater system in south eastern NM USA one freq. Has a tone the other does not (both RX 147.18 and Tx 147.78 the tone is 88.5 on the second one) and it was working great before i made the mod. I have since noticed that the Step (50 Step) will not move off of 10 kHz. And HM is now B0253. VOX I think is stuck in Digital mode it will only scroll A#### thru D#### and will not let me put in any actually freq.
Yaesu Ft 80c Hf Transceiver
I have been thru the whole maneul and check all of the setting and am at a LOSS.